Additel ADT100-HTK 5 Foot Hose Test Kit with Quick Connector
Operating pressure: ADT100-HTK-8K: up to 8,000 psi (550 bar); ADT100-HTK-15K: up to 15,000 psi (1,000 bar)
Burst pressure: 15,900 psi (1,100 bar) for the 8K version; over 30,000 psi for the 15K version
Inlet threaded ports (to the pump): 1/4 NPT male, 1/2 NPT male, 1/4 BSP male, 1/2 BSP male, M20×1.5 male
Output quick-release ports: 1/8″, 1/4″, 3/8″, 1/2″ NPT female (Q); 1/8″, 1/4″, 3/8″, 1/2″ BSP female (Q); M20×1.5 female (Q)
Material: High-strength polyamide, reinforced with synthetic fibre / steel braiding
Size: 5 fооt (1.5 metres), high flexibility and minimal internal volume
Request a callback
Contact us for a free consultation and a quote for our services.
The Additel 100 series Hose Test Kits are designed to extend your pressure calibrations to a convenient location and to adapt from one pressure connection to another. Each test kit includes 5 feet (1.5 m) of flexible high-pressure hose and a pre-installed hand-tight quick connector.
Available in two pressure ratings:
• ADT100-HTK-8K: Maximum pressure 8,000 psi (550 bar), burst pressure 15,900 psi
• ADT100-HTK-15K: Maximum pressure 15,000 psi (1,000 bar)
The internal polyamide material ensures high durability and pressure resistance while maintaining exceptional flexibility and low volumetric expansion. Hand-tight quick connectors enable quick, leak-free connection to test instruments without wrenches or thread sealant.
| Model |
ADT100-HTK ,ADT100-HTK-15K ,ADT100-HTK-8K |
|---|---|
| Range |
ADT100-HTK-15K: up to 15,000 psi (1,000 bar) ,ADT100-HTK-8K: up to 8,000 psi (550 bar) |
| Connection |
1/4 NPT male, 1/2 NPT male, 1/4 BSP male, 1/2 BSP male, M20×1.5 male ,1/8", 1/4", 3/8", 1/2" NPT female (Q); 1/8", 1/4", 3/8", 1/2" BSP female (Q); M20×1.5 female (Q) ,Hand-tight quick connector, female |
| Material |
High-strength polyamide, reinforced with synthetic fibre / steel braiding |
DataSheet 100-HTK_Hose_Test_Kits





